![]() Result: When input port of the camera is activated (button, switch, detector.), the image on the device will then become black. ![]() Note: Do not forget to change the value to no in the Trigger and in the Custom Parameter. Step 5: Create a second Action Rule with the following differences: In Action Rule Setup select the recipient you have just created and add the following: ![]() The URL should be the ip address of the camera followed by /axis-cgi/param.cgiĮnter Username and password of the camera and Save. Create a new recipient with the following parameters: Trigger: Input Signal: Digital Input Port: Input 1: Active : YesĪ pop-up window will open. Step 2: Create a new Action Rule under “Setup > Action Rules > Add…” with the following parameters: The privacy mask should take 100% of the field of view. Step 1: Login on the device and add a black Privacy mask under Setup > Video & Audio > Privacy Mask. Requires firmware 5.40 or above and Privacy mask capability. This can be used for example to “disable” or “turn off” the video stream on request or hide the view. You can hide the stream thanks to an event that disables/enables a privacy mask on a device by pushing a button connected to the input port or based on a schedule.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |